Chiba, K., Kanazaki, M., Watanabe, S., Kitagawa, K., and Shimada, T., "Structurization of Design Space for Launch Vehicle with Hybrid Rocket Engine Using Stratum-Type Association Analysis," International Journal of Automation and Logistics, Special Issue on Intelligent and Expert Methods for Sustainable Industrial Systems, Vol.2, Nos.1/2, pp.26-44, 2016. (http://www.inderscience.com/info/inarticle.php?artid=74912, DOI: http://dx.doi.org/10.1504/IJAL.2016.074912)
Kanazaki, M., Matsuno, T., Maeda, K. and Kawazoe, H., "Optimum Driving Condition for Lift Creating Cylinder by Plasma Actuators Based on Wind Tunnel Evaluation Based Design," International Journal of Automation and Logistics, Special Issue on Intelligent and Expert Methods for Sustainable Industrial Systems,Vol. 2, Nos. 1/2, pp. 45-59, 2016. (http://www.inderscience.com/info/inarticle.php?artid=74913, DOI: http://dx.doi.org/10.1504/IJAL.2016.074912)
Othama, N., and Kanazaki, M., "Development of Digital Flight Motion Methodology based on Aerodynamic Derivatives Approximation,"Journal of Robotics and Mechatronics, (accepted).
Kishi, Y., Kanazaki, M., Makino, Y. and Matsushima, K., "Planform Dependency on Airfoil Design Results for Supersonic Wing in Supersonic and Transonic," Journal of Flow Control, Measurement & Visualization, Vol.4 No.1, January 2016.
Kanazaki, M., Ito, S., Kanamori, F., Nakamiya, M., Kitagawa, K. and Shimada, T., "Design optimization of launch vehicle concept using cluster hybrid rocket engine for future space transportation," Journals of the Japan Society of Mechanical Engineers, Journal of Fluid Science and Technology, Vol.11, No.1, 2015. (DOI: http://doi.org/10.1299/jfst.2016jfst0003)
Chiba, K., Kanazaki, M., Ariyairt, A., Yoda H., Ito S., Kitagawa K. and Shimada T., "Multidisciplinary Design Exploration of Sounding Rocket Using Hybrid Rocket in View of Ballistic Performance," International Journal of Turbo and Jet Engines, Vol.32, Issue 3, pp.299-304, 2015.
Kanazaki, M., Utsuki, M., Sato, T. and Matsushima, K., "Airfoil Design for Martin Airplane Considering Using Global Optimization Methodology," International Journal of Aerospace System Engineering, Vol.2, No.2, pp.29-33, 2015. (ISSN 2383-4986 http://ijase.sase.or.kr/MN/)
Kanazaki, M., Ariyairt, A. Yoda, H., Ito, K., Chiba, "Design Optimization of Single-Stage Launch Vehicle Using Hybrid Rocket Engine," International Journal of Aerospace System Engineering, Vol.2, No.2, pp.29-33, 2015. (ISSN 2383-4986 http://ijase.sase.or.kr/MN/)
金崎雅博,「火星探査航空機用翼型の設計探査」,電気学会論文誌C,Vol. 135,No. 7,p. p. 893-900, 2015年7月.
Ariyarit, A., and Kanazaki, M.,"Multi-Modal Distribution Crossover Method Based on Two Crossing Segments Bounded by Selected Parents Applied to Multi-Objective Design Optimization," Journal of Mechanical Science and Technology, Springer, Volume 29, Issue 4, pp 1443-1448, April 2015.
Kanazaki, M., Sato, T., and Matsushima, K., "Parametric Airfoil Representation Toward Efficient Design Knowledge Discovery under Various Flow Condition," Transaction of The Japan Society for Aeronautical and Space Science, Vol. 12, No. APISAT-2013, pp. a93-a98, April, 2015.
著書
Toru Shimada, Saburo Yuasa, Harunori Nagata, Shigeru Aso, Ichiro Nakagawa, Keisuke Sawada, Keiichi Hori, Masahiro Kanazaki, Kazuhisa Chiba, Takashi Sakurai, Takakazu Morita, Koki Kitagawa, YutakaWada, Daisuke Nakata, Mikiro Motoe, Yuki Funami, Kohei Ozawa and Tomoaki Usuki, "Hybrid Propulsion Technology Development in Japan for Economic Space Launch," Springer International Publishing, Switzerland, 2016. (DOI 10.1007/978-3-319-27748-6_22)
Kanazaki, M., Matsuno, T., Maeda, K. Kawazoe, H., "Wind Tunnel Evaluation Based Design of Lift Creating Cylinder Using Plasma Actuators," Adaptation, Learning and Optimization, Volume 1, Edited by Handa, H., Ishibuchi, H., Ong, Y-S, Tan, K-C, Springer, 2015, pp.509-521. (ISBN: 978-3-319-13359-1, ISSN: 2363-6084, DOI: 10.1007/978-3-319-13359-1_39)
Chiba, K., Kanazaki, M., Kitagawa, K., and Shimada, T."Conceptual Design of Single-Stage aunch Vehicle with Hybrid Rocket Engine Using Design Informatics," Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences, Edited by Greiner, D., Galvan, B., Periaux, J., Gauger, N., Giannakoglou, K., and Winter, G., Computational Methods in Applied Sciences, Springer, pp.369-384, 2015. (ISBN: 978-3-319-11540-5 (ISBN for eBook: 978-3-319-11541-2), ISSN: 1871-3033,
Ariyarit Atthaphon,田辺安忠,金崎雅博,「Multi-segment Class Shape Transformation (CST)for Global Design Exploration of Rotary Wing」,計測自動制御学会 システム・情報部門学術講演会2015,函館,2015年11月.
Ariyarit, A. , Sugiura, M., Tanabe, Y. and Kanazaki, M. (2015), "Hybrid Surrogate Model based on Multi- fidelity Efficiency Global Optimization Applied to Helicopter Blade Design", 14th Copper Mountain Conference on Iterative Methods, 20-25 Mar., Copper Mountain, Colorado.
Othman, N. and Kanazaki, M., "Aircraft's Trajectory Optimization During Descent Using Kriging Model Based Genetic Algorithm,"14th Copper Mountain Conference on Iterative Methods, 20-25 Mar., Copper Mountain, Colorado.
Chiba, K, Kanazaki, M, "Ascendancy of Re-Ignition on Single-Stage Hybrid Rocket for Scientific Observation," the AIAA Science and Technology Forum and Exposition 2016 (SciTech2016), January 2016.
Endo, .,Kanazaki, M., Murayama, M., and Yamamoto, K., "Influence of Engine Intake/Exhaust on Wing Design of Civil Aircraft by Means of Knowledge Discovery Techniques," the AIAA Science and Technology Forum and Exposition 2016 (SciTech2016), January 2016.
Chiba, K., Ito S., Yoda, H and Kanazaki, M, "Visualization of Design-Space Constitution for Single-Stage Hybrid Rocket with Rigid Body in View of Extinction-Reignition," 2015 IEEE Symposium Series on Computational Intelligence (IEEE SSCI2015), Cape Town, South Africa, pp.933-9407-10 December, 2015、.
Y. Kishi, M. Kanazaki, Y. Makino, K. Matsushima, "Planform Dependency on Airfoil Design Results for Supersonic Wing, "Twelfth International Conference on Flow Dynamics, ICFD2015, Sendai, 2015.
"K. Yamahara, D. Oshiyama, H. Nagai, M. Kanazaki, D. Numata, K. Asai, "Evaluation of Aerodynamic Characteristics of an Optimized Airfoil for Mars Airplane," ICFD2015, Sendai, 2015.
Kanazaki, M., Chiba K.,Ito, S., Nakamiya, M., Kitagawa, K. and Shimada, T., "Genetic Algorithm Applied to Design Knowledge Discovery of Launch Vehicle Using Clustered Hybrid Rocket Engine," 11th edition of the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, EUROGEN-2015, September, Glasgow (UK), 2015.
Chiba, K., Watanabe, S., Kanazaki, M, Kitagawa, K. and Shimada, T., "Elucidation of Influence of Fuels on Hybrid Rocket Using Visualization of Design-Space Structure," 11th edition of the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, EUROGEN-2015, September, Glasgow (UK), 2015.
Kanazaki, M., Matsuno, T., Maeda, K, and H., Kawazoe, "Efficient global optimization applied to multi-objective design optimization of lift creating cylinder using plasma actuators," The 6th International Conference on Computational Methods (ICCM2015), Auckland, New Zealand, July, 2015.
Takashi Matsuno, Masahiro Kanazaki, Kenichi Haruna, Gouji Yamada, Hiromitsu Kawazoe, "EXPERIMENTAL OPTIMIZATION OF PLASMA AERODYNAMIC CONTROL AND THEIR FLOW ANALYSIS," ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015.
Kanazaki, M., Ariyairt, A., Yoda, H., Ito, S., Chiba K., Kitagawa, K. and Shimada, T., "Optimization of Ballistic Performance for Launch Vehicle using Hybrid Rocket Engine Based on Enhanced Flight Simulation," 30th International Symposium on Space Technology and Science, Kobe, Japan, July, 2015.
Nagai, H., Anyoji, M., Nonomura, T., Oyama, A., Okamoto, M., Sasaki, G., Matsumoto, T., Yonemoto, K., Kanazaki, M. and Sunada, S., Yonezawa, K., Koike, M., Fujita, K., Asai, K. and Fujii, K., "Aerodynamic Challenges to Realize Mars Airplane," 30th International Symposium on Space Technology and Science, Kobe, Japan, July, 2015.
Utsugi, M., Kanazaki, M., Sato, T. and Matsushima K., "Multi-Objective Design of Airfoil for Martin Airplane considering Trailing Edge Thickness," 30th International Symposium on Space Technology and Science, Kobe, Japan, July, 2015.
Kido, A., Tanaka, K., Kawaguchi, S. and Kanazak, M., "The Outreach Activity about Space Development using Free Magazine," 30th International Symposium on Space Technology and Science, Kobe, Japan, July, 2015.
Kanazaki, M., Matsuno, T., Maeda, K, and H., Kawazoe, "Efficient Global Optimization Applied to Aerodynamic Drag Reduction Around Cylinder Using Plasma Actuators in Wind Tunnel Experiment," IEEE Congress on Evolutionary Computation (CEC) 2015, May, 2015.
Yoda, H., Ito, S., Kanazaki, M., Chiba, K., Kitagawa K. and Shimada, T., "Evolutionary Algorithm Applied to Ballistic Launch Vehicle Design Using Hybrid Rocket Engine Evaluated by Enhanced Flight Simulation," IEEE Congress on Evolutionary Computation (CEC) 2015, May, 2015.
Masahiro Kanazaki , Motohiro Utsuki, Takaya Sato, Kisa Matsushima, "Airfoil Design for Martin Airplane Considering Using Global Optimization Methodology," the 8th Asian-Pacific Conference on Aerospace Technology and Science (APCATS 2015), Jeju, Korea, May 2015.
Kazuhisa Chiba, Masahiro Kanazaki, Atthaphon Ariyairt, Hideyuki Yoda, Kazuma Ito, Koki Kitagawa and Toru Shimada, "Multidisciplinary Design Exploration of Sounding Rocket Using Hybrid Rocket in View of Ballistic Performance," I the 8th Asian-Pacific Conference on Aerospace Technology and Science (APCATS 2015), Jeju, Korea, May 2015.